Rain Downspout Roll Forming Machine is designed having a chain-based transmission system with hydraulic cutting section. It is used to make hollow pipes with help of hard chrome plated steel rollers and curving section. This machine is highly efficient in nature and is provided with a manual decoiler having the capacity to hold 3 tons of coil weight. It also helps in saving labor as it requires only two people for operation. Rain Downspout Roll Forming Machine can operate at high speed that can go up to 15 meters per minute with a rolling thickness range of 0.3 to 0.6 mm.
Main Components
Commodity & Description | Quantity |
3T manual uncoiler | 1 set |
Infeed guiding | 1 set |
Main roll forming machine | 1 set |
straighten device | 1 set |
Hydraulic cutting equipment | 1 set |
Output table | 1 set |
Main drive | 1 set |
Hydraulic system | 1 set |
Controlling system (including cabinet) | 1 set |
Downpipe elbow forming machine | 1 set |
seaming machine | 1 set |
Technical Parameter
Description | Offered specification |
Roll forming machine | |
Rolling speed | 10-15m/min(not include cutting time) |
Rolling thickness | 0.3-0.6mm |
Raw material | Galvanized steel sheet |
dimension | 3500 x 1600 x 1500(mm) |
Effective width | 60mm |
Roller stations | 13 stations One stage for embossing |
Roller material | 45#forge steel, coated with chrome |
Shaft diameter | Φ70mm ,material is 45# forge steel |
Transmission | By chain 1 inch |
Material of chain | 45# forged steel with frequency quenching, 12A |
Material of cutting | Cr12Mov with quench HRC58-62° |
Tolerance | 6m+-1.5mm |
Frame | H type steel |
![]() |
CANGZHOU KINGTER ROLL FORMING MACHINE CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |