PLC System Roof Roll Forming Machine is considered a boon for the metal fabrication sector for increasing efficiency & productivity. It is completely automatic in nature and requires 1-2 people for operation thus helps in reducing labor cost. This machine is suitable for use with sheet metal thickness of 0.3 to 0.8 mm. It is equipped with sturdy steel made rollers that have a chrome plated surface finish. With forming speed of up to 20 meters per minute, PLC System Roof Roll Forming Machine comprises quenched Cr12 cutting blade, press mold, & punch mold. It is available in customized configurations as demanded according to client's need.
Technical Specification
Item | Parameter | |
Suitable Material | Type | Metal Sheet |
| Customized Profile | |
Thickness | 0.3-0.8mm | |
Product Specs | Cover width | Customized Profile |
Length | Any length | |
Power Specs | Type | 380V/3PH/50HZ |
Main Motor | As per design | |
Hydraulic | As per design | |
Machine Specs | Transmission | Chain and Sprocket |
Structure | Wall Plate | |
Shafter | No.45 steel tempered | |
Rollers | No.45 steel chrome coated | |
Cutting Blade | Cr12 quenched | |
Press Mould | Cr12 quenched | |
Punch Mould | Cr12 quenched | |
Working Capacity | Forming Speed | 0-20m/min |
Working Speed | Up to Length-set Cutting | |
Manual Decoiler (Optional) | Type | Hydraulic |
Max. Capacity | 5 T | |
Suitable coil OD | 1200mm | |
Suitable coil ID | 508/610mm | |
Max Coil width | 1250mm | |
Forming Stand | 8-30 | |
Forming Shaft Diameter | 55-100mm | |
Type of Cutting | Length-set cutting after roll formed | |
Control System | DELTA PLC and Inverter | |
Output Supporter | 2 Pcs Simple Supporter |
![]() |
CANGZHOU KINGTER ROLL FORMING MACHINE CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |