Technical Specification
A Decoiler
Load Capacity | 5T |
Coil Inner-Diameter | ≤508mm |
Coil Outer-Diameter | ≤3000mm |
Material thickness | 0.8mm-1.5mm |
Feeding width | 1000mm(acccodring profile drawing ) |
Effective width | 688mm(acccodring profile drawing) |
Forming Steps | 30steps |
Line Speed | 8 to 15m/min(adjustable) |
Stand | Independent stand structure (raft structure) |
Drive | Independent motor and moved by chain |
Material of Roller | 40Cr, HRC45-55 |
Shaft Diameter | 100 to110mm |
Main Motor Power | About 30KW |
Voltage | 380V/50HZ/Three Phase |
C Hydraulic Cutting Device
Cutting Die | Cr12, HRC58-62 |
Tolerance | ±2mm |
Valve | Adopts Italy Atos |
Hydraulic power | 7.5kw |
D Output table
Function | It is used to collect the profiles after roll forming. |
Structure | The roller is coated with Cr (Zn) |
Length | 6000mm |
Function | Control the whole line manually and automatically |
Structure | MITSUBISHI PLC control, human and machine screen. |
Marks | Main Application: Floor decking |
![]() |
CANGZHOU KINGTER ROLL FORMING MACHINE CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |