We are indulged in presenting Container Board Roof Roll Forming Machine for 5 years now. This machine is majorly used by manufacturers that are working towards providing a reliable roofing system. A roll forming machine is basically used for performing operations on long strips of metals for achieving the required cross-sectional profile. It also has a line, which is separated into four main parts. The first one loads the metal; the next section contains rollers that shape the metal. The next section contains cut off the press, which cuts the metal into pre-determined length. Further, the final section of Container Board Roof Roll Forming Machine is from where the finished part exits onto a conveyor.
Technical Specification
Uncoil | manual uncoil or hydraulic uncoiler |
Raw material thickness | 0.2mm-1.5mm |
Material | as customers demand |
Machine dimension | 9600mm*2200mm*1900mm(L*W*H) |
Feeding width | according to your profile |
Forming station | 15 -18 steps or more |
Shaft diameter | 90 mm |
Shaft material | high grade 45# steel, heated and quenched |
Roller material | high grade 45# steel,coated with 0.05mm chrome |
Forming speed | 18-28m/ min(adjustable) |
Transmission type | chain transmission |
Machine frame stand | welded structural steel,thickness is 20mm |
Motor | Detal brand / Siemens brand or as your need |
Main motor power | 3-11 kw |
Cutting type | stop hydraulic cutting |
Cutting power | 7.5 kw |
Cutter material | Cr12 with quenched treatment HRC 58-62 |
Cutting length error | ±1mm |
Voltage | 380V & 50HZ & 3 or according to your requirement |
Control system | PLC control system |
Size of PLC | 2700mm*1000mm*300mm |
PLC | Siemens or Detal as customers demand |
![]() |
CANGZHOU KINGTER ROLL FORMING MACHINE CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |