Automatic T Grid Light Keel Roll Forming Machine

Product Description

Automatic T Grid Light Keel Roll Forming Machine manufactured and supplied by us is greatly admired for assuring high work precision with good production speed. It can easily work with feed metal thickness range of 0.4 to 0.8 mm and material hardness of 550 mpa-350 mpa. This machine shows the maximum forming speed of up to 20 meters per minute and features geared drive mode. It is easy to use & maintain and has a long service life. Automatic T Grid Light Keel Roll Forming Machine comprises tempered steel made shaft with optimum surface hardness.

Automatic T Grid making machine takes strip as a raw material, and produces complex cross-section profiles through continuous cold rolling molding. The machine integrates several equipment and devices, like forming hosts, decoiler, guide rack, calibration device and receiving station. This automatic machine can be easily operated.

Automatic T Grid making machine Material

• Processing material: colored steel plate, galvanized plate, or aluminum plate
• Material thickness: 0.4-0.8mm
• Material hardness: 550 mpa---350 mpa
• Formed width: 100mm
• Forming speed: 20m/min
  
  

Passive uncoil pulled by roll forming system

• Loading capacity:1500kg
• Uncoiling width:300mm
• Inner diameter: 450-550 mm Automatic T Grid making machine Entry Beach
  
  

Technical Specification

• Length of the main part: about 3300 *1500 *1200
• Weight of main part: 3000kg
• Voltage : 380 V/50HZ 3Phase or as your required
• Roller fixer : middle plate
• Frame : 450 H steel welded
• Drive mode: gear
• Frame thickness:30mm
• Material of rollers:GCr12MoV, surface hard chromium plating.
• Material of shafts: 45# steel with tempering
• Diameter of shafts:   40mm
• Number of rollers : 14 rollers
• Main power: 3 kw