With years of field experience, we have been engaged in manufacturing Aluminum Standing Seam Metal Roof Machine. This state of art roll forming machine runs more gauges and sizes with minimum adjustments and less scrap. Thus, it also brings efficiency and time-savings to every project. Moreover, metal roofs produced by this machine have a protective barrier on both sides of the sheet, which further also provides protection against rust. Further, Aluminum Standing Seam Metal Roof Machine utilizes aluminum instead of steel, as it is lightweight and its strength-to-weight ratio is also the highest.
Technical Specification
Name of commodity & specification | XN-312 ridge tile roll forming machine |
Main motor power | 4kw, 3 phase |
Hydraulic motor power | 3kw |
Hydraulic Pressure | 10-12MPa |
Voltage | 380V /3phase/ 50 HZ (or as your requirement) |
Control System | PLC Delta Inverter |
Main Frame | 400mm H-Beam |
Backboard Thickness | 18mm |
Chain Size | 33mm |
Feeding Material | color steel coils |
Feeding Thickness | 0.3-0.8mm |
Feeding Width | 600mm |
Effective width | 312mm |
Productivity | 4-8m/min |
Roll Station | 14 |
Roller Diameter | 65mm |
Roller material | 45# steel |
Cutter material | Cr12 , quenched |
Cr-Plating Size | 0.05mm |
Overall Size | 7500×1000×1200mm |
Total Weight | 3T |
![]() |
CANGZHOU KINGTER ROLL FORMING MACHINE CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |