3 Kw Power Downspout Roll Forming Machine is designed having decoiler, straightening unit, forming section, & cutting system. It is known to have the hassle-free operation with good processing speed and repeatability. This machine comprises a chain-based transmission system with robust quenched Cr12 Mov blade. It shows a forming speed range of 10 to 15 meters per minute and can accommodate feed material thickness of 0.3 to 2.0 mm. 3 Kw Power Downspout Roll Forming Machine is equipped with 20 roller stations where one stage is reserved for embossing purpose.
Technical Specification
Description | Offered Specification |
Roll forming machine | |
Rolling speed | 10-15m/min(not include cutting time) |
Rolling thickness | 0.3--2.0 mm |
Raw material | Galvanized steel sheet |
Dimension | 3500 x 1600 x 1500(mm) |
Effective width | 60mm |
Roller stations | 20 stations One stage for embossing |
Roller material | 45#forge steel, coated with chrome |
Shaft diameter | Φ70mm ,material is 45# forge steel |
Transmission | By chain 1 inch |
Material of chain | 45# forged steel with frequency quenching, 12A |
Material of cutting | Cr12Mov with quench HRC58-62° |
Tolerance | 6m+-0.05mm |
Frame | H type steel |
Commodity & Description | Quantity |
3T manual uncoiler | 1 set |
Infeed guiding | 1 set |
Main roll forming machine | 1 set |
straighten device | 1 set |
Hydraulic cutting equipment | 1 set |
Output table | 2 sets |
Main drive | 1 set |
Hydraulic system | 1 set |
Controlling system (including cabinet) | 1 set |
Downpipe elbow forming machine | 1 set |
seaming machine | 1 set |
![]() |
CANGZHOU KINGTER ROLL FORMING MACHINE CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |